Please read carefully as these Terms & Conditions are applied to all purchases from Tractor Manuals Downunder.
By accepting charge(s) of any product(s) from Tractor Manuals Downunder, customers (buyers) agree to be bound by the terms and conditions listed below. Any attempt to alter, supplement, modify or amend these terms and conditions by the customer will be considered as material alteration of this agreement and, therefore, is void with/without customer acknowledgment. In addition, these terms and conditions are subject to change at any time, with or without prior written notice to the customer(s). Therefore, please check these terms and conditions carefully each time before placing an order with Tractor Manuals Downunder.
These terms and conditions set out the terms and conditions between you, the customer, and Tractor Manuals Downunder (“us”, “we”), governing the use of our website and our downloadable digital recordings including the content therein (the “products”). Your use of our website, and purchase, download and use of our products, constitutes your full acceptance of these terms and conditions. If you do not agree with these terms and conditions, you should not use our website or purchase, download or use any of our products.
License and Use
Your purchase of one of our products constitutes our granting to you of a non-exclusive, non-sublicensable, non-transferable license to download and access that product for the purpose of your own personal use and reference, and print or convert the product to an image or vector format for your own storage, retention and reference (the “purpose”). You agree that under no circumstances shall you use, or permit to be used, any product other than for the aforesaid purpose. For the avoidance of doubt, you shall not copy, re-sell, sublicense, rent out, share or otherwise distribute any of our products, whether modified or not, to any third party. You agree not to use any of our products in a way which might be detrimental to us or damage our reputation.
You agree that under no circumstances, whether the product has been modified or not, shall you have or attempt to claim ownership of any intellectual property rights or copyright in the product.
Refunds and Chargebacks
Once a product has been purchased by you, no right of cancellation or refund exists under the Consumer Protection (Distance Selling) Regulations 2000 due to the electronic nature of our products. Any refunds shall be at our sole and absolute discretion. You agree that under no circumstances whatsoever shall you initiate any chargebacks via your payment provider. You agree that any payments made by you for any of our products are final and may not be charged back. We reserve the right to alter any of our prices from time to time.
However, we realize that exceptional circumstance can take place with regard to the character of the product we supply. We DO honor requests for refund for the following reasons:
- if the manual you downloaded was clearly not the manual stated at checkout (i.e. we accidentally put the wrong manual file with the manual product);
- if the file is corrupted (we will test this on our end)
If any of the above applies to you or even if you have more questions about our return policy please contact us on our contact page.
Warranties and Liability
You agree to indemnify us against all liabilities, claims, demands, expenses, actions, costs, damages, or loss arising out of your breach of these terms and conditions. Furthermore, we shall not be liable to you or any party for consequential, indirect, special or exemplary damages including but not limited to damages for loss of profits, business or anticipated benefits whether arising under tort, contract, negligence or otherwise whether or not foreseen, reasonably foreseeable or advised of the possibility of such damages.
These terms and conditions constitute the entire agreement and understanding between you and us for the supply of downloadable digital products, and shall supersede any prior agreements whether made in writing, orally, implied or otherwise. The failure by us to exercise or enforce any right(s) under these terms and conditions shall not be deemed to be a waiver of any such right(s) or operate so as to bar the exercise or enforcement thereof at any time(s) thereafter, as a waiver of another or constitute a continuing waiver. You agree that monetary damages may not be a sufficient remedy for the damage which may accrue to us by reason of your breach of these terms and conditions, therefore we shall be entitled to seek injunctive relief to enforce the obligations contained herein. The unenforceability of any single provision within these terms and conditions shall not affect any other provision hereof. These terms and conditions, your acceptance thereof, and our relationship with you shall be governed by and construed in accordance with English law and both us and you irrevocably submit to the exclusive jurisdiction of the English courts over any claim, dispute or matter arising under or in connection with these terms and conditions or our relationship with you.
Product names, logos, brands, and other trademarks referred to within the Tractor Manuals Downunder website are the property of their respective trademark holders. None of these trademark holders are affiliated with Tractor Manuals Downunder, nor are we sponsored by any of them.
John Deere and its logos are the registered trademarks of the Deere & Company. Agco, Agco Allis, Allis-Chalmers, Hesston, Gleaner, Fendt, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Tractor Manuals Downunder is in no way affiliated with, representing, associated, or sponsored by Allis Chalmers®, Case IH®, Caterpillar®, Cummins®, David Brown®, Detroit Diesel®, Deutz®, Ford/New Holland®, International/Navistar®, John Deere®, Mack®, Massey Ferguson®, Oliver®, Perkins®, Volvo® or their copyrighted products. The trademarks listed belong to their respective owners and are not used by Tractor Manuals Downunder with the permission of the owners, nor have the owners of these marks endorsed, sponsor, approved, or participated in the operation of this website. Tractor Manuals Downunder is not affiliated in any way and is not a distributor for the products listed above. Tractor Manuals Downunder is in no way representing the above mentioned companies. We simply ask the consumer to compare the price of the above mentioned name brands to ours. We do not represent our alternative parts to be original nor do we represent they are exact copies. Any reference to the above name brands and/or part numbers are for comparison purposes only. If you would like the authentic, original, or genuine registered parts from the manufacturers listed above, please purchase them from an authorized dealer.
Tractor Manuals Downunder is not responsible for any injury that may happen while using one of our manuals. Please see a trained mechanic for any mechanical operation that you are untrained to do.
Tractor Manuals Downunder reserves the right to change any price at any time. All pricing errors are subject to correction. We reserve the right to refuse any order.
Tractor Manuals Downunder is not responsible for typographical errors, price differences, or coupon codes validity posted by forums, or any 3rd party affiliates.
Prices and offers are subject to limited time only or while supplies last.
Redistribution or Reselling
The files on your purchase are licensed for authorized users only. The user agreement provides that copying of the files and the data may be done only for individual or personal use and that distribution, sublicense or lease of the manuals or the data is prohibited. The agreement provides expressly that:
- You will not make the File or the Listings in whole or in part available to any other user in any networked or time-shared environment, or transfer the files in whole or in part to any computer other than the computer used to access the purchase.